Short Stay Hotels- 2 hours of – sleep – and move on

#short stay motels

#

Short Stay Hotels- 2 hours of sleep and move on out!

Just incase you did a search for this place, The Kew Motor Inn is the same as Kew Motor Inn.
now. hmm hmmm hmmm

what are you doing looking up this joint huh?

for that matter, what am i doing writing about this joint?

This joint is always packed. There are always a bunch of cars parked out in the private lot and sometimes, dare i say, it can be hard to get a parking spot!

if your friends don t mind a little bit of travel, this place is perrrrfect for a costume birthday party!* Why bother decorating your apartment some Safari theme when theres a hotel room that has already done it for you?
or do you prefer Arabian Nights theme? how about something more futuristic with mirrors and reflecting glass everywhere?

well, you can also bring in your fancy someone-someone and have a few hours of fun too. **

yes, they do charge at an hourly rate. and yes, minors are not allowed (ID is checked)***

its clean and super sanitized. good luck getting a room on Valentines Day!

_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-
*of course this is the reason why I went there. Isnt it the same reason you re going there too?
** I thought so. Go on and book the Arabian Room. Your special friend will like it.
***Safety is important! of course it goes to show that mayyyybeeee you might run into rather unsavory folks in the hallways. But at least you know that burly, scary, puffed-up-chest-haired man is over 18!

Just incase you did a search for this place, The Kew Motor Inn is the same as Kew Motor Inn.
now. hmm hmmm hmmm

what are you doing looking up this joint huh?

for that matter, what am i doing writing about this joint?

This joint is always packed. There are always a bunch of cars parked out in the private lot and sometimes, dare i say, it can be hard to get a parking spot!

if your friends don t mind a little bit of travel, this place is perrrrfect for a costume birthday party!* Why bother decorating your apartment some Safari theme when theres a hotel room that has already done it for you?
or do you prefer Arabian Nights theme? how about something more futuristic with mirrors and reflecting glass everywhere?

well, you can also bring in your fancy someone-someone and have a few hours of fun too. **

yes, they do charge at an hourly rate. and yes, minors are not allowed (ID is checked)***

its clean and super sanitized. good luck getting a room on Valentines Day!

_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-
*of course this is the reason why I went there. Isnt it the same reason you re going there too?
** I thought so. Go on and book the Arabian Room. Your special friend will like it.
***Safety is important! of course it goes to show that mayyyybeeee you might run into rather unsavory folks in the hallways. But at least you know that burly, scary, puffed-up-chest-haired man is over 18!

Did you try driving up north to Kew Motor Inn and it was full? and. you and your special friend could nt wait half an hour? Well, then come on down Grand Central and stay here at the fabulous Par-Central Motor Inn for 3 hours!

yes, it does charge at an hourly rate. safe and discreet, this place is a serious joint.

The parking lot is big, the rooms are clean and spacious and there always seems to be a bunch of cars parked here. Hm. i guess business is good.

No themed rooms here. This place is strictly business as its. not really close to a convention center. or the airport.
So good, because you won t find your Arabian Nights theme here. But you can find the Bleached and Sanitized 8 Times A Day theme here.

Did you try driving up north to Kew Motor Inn and it was full? and. you and your special friend could nt wait half an hour? Well, then come on down Grand Central and stay here at the fabulous Par-Central Motor Inn for 3 hours!

yes, it does charge at an hourly rate. safe and discreet, this place is a serious joint.

The parking lot is big, the rooms are clean and spacious and there always seems to be a bunch of cars parked here. Hm. i guess business is good.

No themed rooms here. This place is strictly business as its. not really close to a convention center. or the airport.
So good, because you won t find your Arabian Nights theme here. But you can find the Bleached and Sanitized 8 Times A Day theme here.

its still cheap, but for the neighborhood, I was expecting cheaper.

I dont really like this place. Its cheap for the neighborhood, but the service sucks.

The rooms arent very special. Not terribly spacious and also not too small. For some odd odd reason the hotel doesnt turn on the heat. in winter. If you re freezing your toes off, call the front desk and ask for more blankets.

and yes. there are many ways to order a room. Hourly* and nightly are both available. mmmhmmmmmmmm

*if you order by the hour, then expect the service to be stingy and a tad mean. oh they ll bring you that blanket. two minutes before your hour session is over and your nether regions have officially frozen off

** but dont expect some awesome themed rooms. none of that good stuff available. look elsewhere for the spiderman room.

its still cheap, but for the neighborhood, I was expecting cheaper.

I dont really like this place. Its cheap for the neighborhood, but the service sucks.

The rooms arent very special. Not terribly spacious and also not too small. For some odd odd reason the hotel doesnt turn on the heat. in winter. If you re freezing your toes off, call the front desk and ask for more blankets.

and yes. there are many ways to order a room. Hourly* and nightly are both available. mmmhmmmmmmmm

*if you order by the hour, then expect the service to be stingy and a tad mean. oh they ll bring you that blanket. two minutes before your hour session is over and your nether regions have officially frozen off

** but dont expect some awesome themed rooms. none of that good stuff available. look elsewhere for the spiderman room.





Learn More About the Florida SHIP Program #s #h #i #p #mortgage


#

Many states have programs to help residents of the state purchase a new home. In Florida this is the S.H.I.P. or State Housing Initiative Partnership, Program. The program was established by the William E. Sadowski Affordable Housing Act of 1992 which provided for a dedicated revenue source with which local governments could help make housing more affordable.

There are several criteria that must be met for one to be eligible for the Florida SHIP program. Applicants may not have owned a home in the previous three years, they must not be purchasing property that will be occupied by a tenant other than themselves, use the home that is to be purchased as a primary resident, and meet the income eligibility requirements based on family size. The program is designed to help those family with incomes ranging from very low to moderate.

As with all things associated with buying a new home there are some general guidelines as well. Ones credit history must be adequate for mortgage purposes, the mortgage must not exceed the appraisal price of the home, and the home must be in good condition.

County governments are given money each year as long as they have a local housing assistance plan. They also usually have to ensure that mortgage payments don’t exceed thirty percent of the median income of the area. The money can be used for a variety of uses including new construction, down payments, closing costs, and mortgage buy-downs. The local governments are required to use the funds for certain demographics based on what the money will be used for and where.

Another important factor to consider is that the Florida SHIP program is essentially a loan. This loan must be repaid if the property is not held for at least twenty years.

Signing up for the Florida SHIP program is relatively simple. The process begins in the county office for housing assistance. This can be located through the U.S Department of Housing and Urban Development. Most Florida banks, mortgage companies, and real estate agents are also familiar with the program and can assist home buyers in finding and filling out the appropriate applications.


A Using SQL Command Line, sqlcmd -h.#Sqlcmd #-h


#

A Using SQL Command Line

This section provides an introduction to SQL Command Line (SQL*Plus), an interactive and batch command-line query tool that is installed with Oracle Database Express Edition.

This section contains the following topics:

For information about running SQL language statements, see Chapter 3, “Using SQL”.

Oracle Database SQL Reference for information about using SQL statements

Oracle Database Express Edition 2 Day DBA for information about connecting to Oracle Database XE with SQL Command Line

Overview of SQL Command Line

SQL Command Line (SQL*Plus) is a command-line tool for accessing Oracle Database XE. It enables you to enter and run SQL, PL/SQL, and SQL*Plus commands and statements to:

Query, insert, and update data

Execute PL/SQL procedures

Examine table and object definitions

Develop and run batch scripts

Perform database administration

You can use SQL Command Line to generate reports interactively, to generate reports as batch processes, and to write the results to a text file, to a screen, or to an HTML file for browsing on the Internet.

Using SQL Command Line

This section describes SQL Command Line (SQL*Plus), a command-line utility to run SQL and PL/SQL.

This contains the following topics:

Before starting SQL Command Line, make sure that the necessary environmental variables have been set up properly. See Oracle Database Express Edition 2 Day DBA for information about setting environmental variables for SQL Command Line.

Starting and Exiting SQL Command Line

To start SQL Command Line from the operating-system command prompt, enter the following:

When prompted, enter the username and password of the user account (schema) that you want to access in the local database. For example, enter HR for the username and my_hr_password for the password when prompted.

You can also include the username and password when you start SQL Command Line. For example:

sqlplus hr/ my_hr_password

If you want to connect to a database running on a remote system, you need to include a connect string when starting SQL Command Line. For example:

sqlplus hr/ my_hr_password @ host_computer_name

After you have started SQL Command Line, the SQL prompt displays as follows:

At the SQL prompt, you can enter SQL statements.

When you want to exit SQL Command Line, enter EXIT at the SQL prompt, as follows:

Displaying Help With SQL Command Line

To display a list of Help topics for SQL Command Line, enter HELP INDEX at the SQL prompt as follows:

From the list of SQL Command Line Help topics, you can display Help about an individual topic by entering HELP with a topic name. For example, the following displays Help about the SQL Command Line COLUMN command, which enables you to format column output:

SQL HELP COLUMN

Entering and Executing SQL Statements and Commands

To enter and execute SQL statements or commands, enter the statement or command at the SQL prompt. At the end of a SQL statement, put a semi-colon (;) and then press the Enter key to execute the statement. For example:

SQL SELECT * FROM employees;

If the statement does not fit on one line, enter the first line and press the Enter key. Continue entering lines, and terminate the last line with a semi-colon (;). For example:

SQL SELECT employee_id, first_name, last_name

2 FROM employees

3 WHERE employee_id = 105 AND employee_id = 110;

The output from the previous SELECT statement is similar to:

EMPLOYEE_ID FIRST_NAME LAST_NAME

105 David Austin

106 Valli Pataballa

107 Diana Lorentz

108 Nancy Greenberg

109 Daniel Faviet

6 rows selected.

Note that a terminating semi-colon (;) is optional with SQL Command Line commands, such as DESCRIBE o r SET , but required with SQL statements.

SQL Command Line DESCRIBE Command

SQL Command Line provides the DESCRIBE command to display a description of a database object. For example, the following displays the structure of the employees table. This description is useful when constructing SQL statements that manipulate the employees table.

SQL DESCRIBE employees

EMPLOYEE_ID NOT NULL NUMBER(6)

LAST_NAME NOT NULL VARCHAR2(25)

EMAIL NOT NULL VARCHAR2(25)

HIRE_DATE NOT NULL DATE

JOB_ID NOT NULL VARCHAR2(10)

SQL Command Line SET Commands

The SQL Command Line SET commands can be used to specify various SQL Command Line settings, such as the format of the output from SQL SELECT statements. For example, the following SET commands specify the number of lines for each page and the number of characters for each line in the output:

SQL SET PAGESIZE 200

SQL SET LINESIZE 140

To enable output from PL/SQL blocks with DBMS_OUTPUT.PUT_LIN E, use the following:

SQL SET SERVEROUTPUT ON

To view all the settings, enter the following at the SQL prompt:

For information about the SQL Command Line SERVEROUTPUT setting to display output from a PL/SQL program, see “Inputting and Outputting Data with PL/SQL”.

SQL*Plus User’s Guide and Reference for information about setting up the SQL Command Line environment with a login file

Running Scripts From SQL Command Line

You can use a text editor to create SQL Command Line script files that contain SQL*Plus, SQL, and PL/SQL statements. For consistency, use the .sql extension for the script file name.

A SQL script file is executed with a START or @ command. For example, in a Windows environment, you can execute a SQL script as follows:

A SQL script file can be executed in a Linux environment as follows:

SQL START /home/cjones/my_scripts/my_sql_script.sql

You can use SET ECHO ON to cause a script to echo each statement that is executed. You can use SET TERMOUT OFF to prevent the script output from displaying on the screen.

When running a script, you need to include the full path name unless the script is located in the directory from which SQL Command Line was started, or the script is located in the default script location specified by the SQLPATH environment variable.

Oracle Database Express Edition 2 Day DBA for information about setting environment variables for Oracle Database Express Edition

SQL*Plus User’s Guide and Reference for information about setting the SQL Command Line SQLPATH environment variable to specify the default location of SQL scripts

Spooling From SQL Command Line

The SPOOL command can be used to direct the output from SQL Command Line to a disk file, which enables you to save the output for future review.

To start spooling the output to an operating system file, you enter the SPOOL command followed by a file name. For example:

SQL SPOOL my_log_file.log

If you want to append the output to an existing file:

SQL SPOOL my_log_file.log APPEND

To stop spooling and close a file, enter the following:

Using Variables With SQL Command Line

You can create queries that use variables to make SELECT statements more flexible. You can define the variable before running a SQL statement, or you specify that the statement prompts for a variable value at the time that the SQL statement is run.

When using a variable in a SQL statement, the variable name must be begin with an ampersand ( ).

This section contains the following topics:

For information about using bind variables in PL/SQL code, see “Using Bind Variables With PL/SQL”.

Prompting for a Variable Value in a Query

You can use to identify a variable that you want to define dynamically. In Example A-1, including the employee_id variable causes the SQL statement to prompt for a value when the statement is executed. You can then enter a value for the employee_id that corresponds to the employee information that you want to display, such as employee ID 125. Note that you can use any name for the variable, such as my_variable .

Example A-1 Prompting for a Variable Value in SQL Command Line

When you run the previous SELECT statement, the output is similar to:

Enter value for employee_id: 125

EMPLOYEE_ID LAST_NAME JOB_ID

125 Nayer ST_CLERK

Reusing a Variable Value in a Query

You can use to identify a variable that you want to define dynamically multiple times, but only want to prompt the user once. In Example A-2, including the column_name variable causes the SQL statement to prompt for a value when the statement is executed. The value that is entered is substituted for all remaining occurrences of column_name in the SQL statement.

Example A-2 Reusing a Variable Value in SQL Command Line

Defining a Variable Value for a Query

In Example A-3, the job_id variable is defined before running the SQL statement with the DEFINE command, and the defined value is substituted for the variable when the statement is executed. Because the variable has already been defined, you are not prompted to enter a value.

Example A-3 Defining a Variable for a Query in SQL Command Line


SOLUTION SQLCMD question, sqlcmd -h.#Sqlcmd #-h


#

SQLCMD question

Sqlcmd -h

  • Facebook
  • Twitter
  • LinkedIn
  • https://www.experts-exchange.com/questions/26314238/SQLCMD-question.html copy
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others share knowledge
  • Earn cash points
  • Learn ask questions

To ask questions and find solutions

  • Sqlcmd -h

  • Sqlcmd -h

  • Sqlcmd -h

    • Sqlcmd -hNAMEWITHELD12 (3 comments)

    Sqlcmd -h

    Sqlcmd -h

    Sqlcmd -h

    Sqlcmd -h

    Will your db performance match your db growth?

    Sqlcmd -h

    In Percona’s white paper “Performance at Scale: Keeping Your Database on Its Toes,” we take a high-level approach to what you need to think about when planning for database scalability.

    Sqlcmd -h

    Sqlcmd -h

    Sqlcmd -h

    it requires the GO in the script file to run the statements, and some exit etc .

    please show more details.

    Sqlcmd -h

    Sqlcmd -h

    trying to run this as a bat file

    Sqlcmd -h

    Sqlcmd -h

    Featured Post

    Sqlcmd -h

    Efficient way to get backups off site to Azure

    Sqlcmd -h

    This user guide provides instructions on how to deploy and configure both a StoneFly Scale Out NAS Enterprise Cloud Drive virtual machine and Veeam Cloud Connect in the Microsoft Azure Cloud.


  • H – tel – R – servation d h – tels #hospice

    #reservation hotels

    #

    Nos hôtels dans le monde

    Choisir votre hôtel pas cher avec lastminute.com

    Sur lastminute.com, découvrez un large choix d’hôtels à petits prix, dans plus de 100 destinations sélectionnées avec soin par nos chefs de produits. Chaque produit a été testé afin de proposer des hôtels pas cher disposant des prestations de haute qualité.

    Des hôtels en France et à l’étranger pour des vacances réussies

    Besoin de vacances et de décompresser. lastminute.com vous propose un large choix d’hôtels pas cher en France et à l’étranger. Après avoir choisi votre destination, nous vous proposons les hôtels les moins chers ayant le meilleur rapport qualité-prix pour un séjour réussi. Alors n’attendez plus et profitez des meilleurs prix avec lastminute.com !

    Découvrez tous nos types d’offres

    Le site accessible à l’adresse www.fr.lastminute.com est édité par la société LMnext FR, SASU au capital de 100.000 €
    R.C.S Nanterre n° 809 437 072, sise 6 rue Castérès – 92110 CLICHY LA GARENNE – France,
    Registre des Opérateurs de Voyages et de Séjours IM092110022, agrément IATA n° 20-2 6439 2, garantie APST, Assurance RCP ALLIANZ 086 931 092, numéro TVA. FR36 809 437 072

    Nous vous rappelons qu’en vertu des articles L-121-16-1 et 121-21-8 du code de la consommation, vous ne bénéficiez pas d’un droit de rétractation sur cette commande.

    * Prix à partir de, taux de remise par rapport au prix public, selon les dates de départ et sous réserve de disponibilité. Voir détail .
    (1) 0,34 € / min TTC depuis un poste fixe.

    “lastminute.com” et “lastminute” sont des marques de “LMnext UK Limited” et/ou les compagnies du groupe.





    H – tel – R – servation d h – tels #palace

    #reservation hotels

    #

    Nos hôtels dans le monde

    Choisir votre hôtel pas cher avec lastminute.com

    Sur lastminute.com, découvrez un large choix d’hôtels à petits prix, dans plus de 100 destinations sélectionnées avec soin par nos chefs de produits. Chaque produit a été testé afin de proposer des hôtels pas cher disposant des prestations de haute qualité.

    Des hôtels en France et à l’étranger pour des vacances réussies

    Besoin de vacances et de décompresser. lastminute.com vous propose un large choix d’hôtels pas cher en France et à l’étranger. Après avoir choisi votre destination, nous vous proposons les hôtels les moins chers ayant le meilleur rapport qualité-prix pour un séjour réussi. Alors n’attendez plus et profitez des meilleurs prix avec lastminute.com !

    Découvrez tous nos types d’offres

    Le site accessible à l’adresse www.fr.lastminute.com est édité par la société LMnext FR, SASU au capital de 100.000 €
    R.C.S Nanterre n° 809 437 072, sise 6 rue Castérès – 92110 CLICHY LA GARENNE – France,
    Registre des Opérateurs de Voyages et de Séjours IM092110022, agrément IATA n° 20-2 6439 2, garantie APST, Assurance RCP ALLIANZ 086 931 092, numéro TVA. FR36 809 437 072

    Nous vous rappelons qu’en vertu des articles L-121-16-1 et 121-21-8 du code de la consommation, vous ne bénéficiez pas d’un droit de rétractation sur cette commande.

    * Prix à partir de, taux de remise par rapport au prix public, selon les dates de départ et sous réserve de disponibilité. Voir détail .
    (1) 0,34 € / min TTC depuis un poste fixe.

    “lastminute.com” et “lastminute” sont des marques de “LMnext UK Limited” et/ou les compagnies du groupe.