Drain Cleaning Las Vegas – Affordable drain – sewer cleaner #drain #cleaning


#

Sewer Drain Cleaning Las Vegas

Got clogged sewer or blocked drain in Las Vegas, NV? Call Us, we are expert drain cleaners!

$60.00 Kitchen sink drain cleaning special

$60.00 Kitchen sink drain cleaning special is for residential properties only with accessible clean-out. Not for main sewer, One per customer. No rental properties. No weekends or emergency service.

MG Drain Cleaning Services is a family owned and operated business that provides affordable sewer cleaning. drain cleaning, hydro jetting and sewer camera inspection in the Las Vegas Valley.

We provide Las Vegas drain cleaning services in Las Vegas, Henderson, North Las Vegas and Summerlin in Nevada.

Our rates are reasonable and the job is always performed by a journeyman with 17 years of experience and professionalism guaranteed.

We look forward to providing you with the best drain cleaning services in Clark county, Nevada.

We will help you with your sewer and drain cleaning service needs.

  • Drain stoppage
  • Clogged drains
  • Clogged kitchen sink
  • Clogged toilet
  • Clogged shower
  • Clogged bathtub
  • Drenaje tapado
  • Servicios de drenajes
  • Sewer backups
  • Drain cleaning Las Vegas
  • 17 years of professional experience.
  • Discount sewer and drain cleaning
  • High pressure water drain cleaning
  • Hydro Jetting service
  • Sewer camera inspections
  • Drain cleaning
  • Sewer cleaning
  • Slow drains
  • Blocked drains
  • Rooter service
  • Free estimates
  • Affordable rates
  • Trustworthy Las Vegas drain professional
  • Bilingual English and Spanish
  • All the work is guaranteed
  • Professional drain cleaner Las Vegas

Call MG Drain Cleaning Services for any clogged drain or sewer backup.

Unclogging pipes services

Servicio de drenajes tapados

Sewer pipe inspection locating

Plumbers Las Vegas | las vegas drain cleaning | drain cleaning services | sewer cleaning | las vegas rooter | sewer camera inspection | clogged drain | discount drain cleaning | Limpieza de drenaje | Drenaje tapado | Plomero en Las Vegas | Drain Cleaning Service Las Vegas | Drain cleaning service | Hydro Jetting | plumbery | Las Vegas Plumbing | Emergency Plumber | Garbage disposal repair | Plumber near me | Local plumbers | How to unclog sink |

COMPANY


How to Connect Gas Pipe Lines #plumbing #gas #pipe


#

How to Connect Gas Pipe Lines

Overview and materials

Gas connections for your oven or dryer are really pretty simple—it’s mostly a matter of screwing stuff together. But knowing which fittings to use where can be tricky, and using the wrong ones can lead to a dangerous leak. This article will show you how to safely connect a gas dryer or gas range.

Kits containing a flexible stainless steel gas line and fittings are available at home centers and hardware stores. The kits usually have everything you’ll need, but in some cases, you may have to buy a few more fittings. But before you start, check with your local building inspections department to see if you’re allowed to do your own hookup.

On the next pages, we’ll show you three common gas piping scenarios. We’ll show you one way to make each connection, but there are other equally legitimate ways using common plumbing parts. Don’t be confused by the labels FIP and MIP; they simply stand for female pipe threads and male pipe threads, respectively. And when you buy the parts, don’t hesitate to ask for help. Then screw all the parts together to make sure they fit.

Situation 1: Make connections to steel gas pipe

Older houses often have threaded steel gas pipe. If your old appliance is connected with a steel pipe and you’re installing a new appliance, buy a gas appliance connecting kit and replace the steel pipe with the flexible stainless steel tube. But remember, you can’t connect the flare fitting on the flexible gas line directly to a steel pipe thread. You have to install the flare fitting that’s included with the kit.

Also replace old-style gas valves (photo below) with modern ball valves that are labeled for use with gas. Before you replace an old valve, you’ll have to find and turn off the main gas valve to the house. It’s usually located near where the gas line enters the house. When you turn the gas back on, remember to check all your gas appliances to see if they have pilot lights that need relighting.

The photo shows how to use common plumbing parts to join a new ball valve and a flexible stainless steel connector to steel pipe. Coat all threaded pipe connections with pipe thread compound before assembly. The valve shown has 1/2-in. female pipe threads on both sides. If necessary, use a bushing to reduce the existing 3/4-in. female pipe thread to 1/2 in. Use a 90-degree elbow at the stove to avoid kinking the gas tubing when you push the stove against the wall.

Proper Connections to Steel Pipe

Use the fittings shown for safe connections.

Steel pipe gas connections

Old-Style Gas Valve

Old-style gas valves can leak. Replace them with approved ball valves.

Old style gas valve

Situation 2: Connections to soft copper

Connections for flexible “soft” copper are made by flaring the end of the soft copper tubing with a special flaring tool and installing flare fittings that have a matching cone-shaped meeting surface. Common sizes of flare fittings are 3/8 in. 1/2 in. and 5/8 in. Match flare fittings to the outside diameter of the soft copper you’re connecting to.

The photo below shows a soft copper line that’s kinked and should be replaced. There are two options. You could cut a new length of coiled soft copper, flare the ends and connect it with flare fitting. Or you could replace the damaged tubing with a flexible stainless connector as shown here. If the flare fitting on the flexible stainless gas line matches the size of the flare fitting on the existing gas valve, you can simply screw it on. If the fittings don’t match, one solution is to replace the valve with one that has a flare fitting on one side and a 1/2-in. female pipe thread on the other side. Then use the adapter included with your hookup kit to connect the flexible gas line. On the stove end, use another flare-to-pipe-thread fitting.

Remember to apply pipe thread compound or gas-rated Teflon tape to the threads on threaded connections before assembling them. Flare joints rely on a tight fit to seal and don’t require additional sealant.

Proper Connections to Soft Copper

Use the fittings shown for safe connections.

Coat fittings threads with compound to help prevent leaks.

It’s common for appliances to be connected with a coil of soft copper like the one shown here. The ends of the copper tubing will be flared like the end of a trumpet. A leak-proof joint is formed by the perfect fit between the flared end of the tube and the cone-shaped fitting. If the soft copper tubing isn’t kinked or damaged, you can reuse it to connect your new appliance. For this dryer connection we purchased a brass elbow with a 1/2-in. flare fitting on one side to match the 1/2-in. flare on the copper tubing, and a 3/8-in. female iron thread fitting on the other to match the 3/8-in. pipe exiting the back of the dryer. Your tubing may be a different size and your appliance may have different threads. Buy fittings to match. Coat threads with pipe thread compound or gas-rated Teflon tape before assembling. Align the copper tubing so the flare fits perfectly before threading on the flare nut. Tighten the nut with an adjustable or open-end wrench.

Fittings for Reusing a Soft Copper Coil

Use the fittings shown to reconnect a coil of soft copper.

Soft copper coil connections

Test for Leaks

Turn the gas back on and swab each joint with a solution of 2 tsp. dishwashing liquid to 1 cup water or with a commercially prepared leak testing solution. Coat each connection and watch for bubbles to form. If you see a bubble, turn off the gas. First try tightening the leaky connection. If this doesn’t work, take it apart. Inspect flare connections for debris or damage. Fix leaky threaded connections by reapplying pipe joint compound or gas-rated Teflon tape and reassembling the fitting.

Required Tools for this Project

Have the necessary tools for this DIY project lined up before you start—you’ll save time and frustration.

  • Pipe wrench
  • Adjustable wrenches

You may also need a flaring tool.

Required Materials for this Project

Avoid last-minute shopping trips by having all your materials ready ahead of time. Here’s a list.

Similar Projects


  • Popular How-To Videos


  • Pex Repiping #los #angeles #repipe, #los #angeles #repiping, #long #beach #repipe, #long


    #

    PEX REPIPE SPECIALIST

    Uponor Pex Repipe – The World’s First, Best, And Most Widely Used System For Single Family Homes And Residential Units.

    What is PEX?

    PEX is an acronym for crosslinked polyethylene. It is a flexible, durable, proven piping product that has been used in plumbing systems for more than 20 years. PEX tubing won’t pit, scale or corrode and, because of its flexibility, it also offers potential freeze-damage protection.

    Residential Commercial Pex Plumbing. Call Toll Free 877-473-7473

    Uponor Pex plumbing systems feature PEX-a tubing, which is considered the superior PEX tubing manufacturing method in the industry. PEX-a is the most flexible of all PEX types, and because of its shape and thermal memory, it can use ProPEX expansion fittings which are the only fitting system that actually gets stronger over time – making it highly leak resistant.

    1) Repiping in a home begins at the transition point.

    2) The transition point is the point where the potable water system enters the building from the exterior of the building.

    3) Repiping a potable water system means you totally abandon the existing potable system and replace it with a new system.

    4) The first step in repiping your home is masking or “covering” the floors, and this must be completed before the walls are masked off. This overlap “ enveloped ” system allows the plastic sheeting to be rolled up in one continuous motion.

    5) Cutting the sheetrock: You will be shocked at how little sheetrock has to be removed for the layout and installation of a new potable water system. A real Pex Plumber is an expert at HVAC, framing, plumbing, and electrical layout, and will lay out the home pex repipe in the most effective route. The better the repiper. the smaller and fewer the drywall holes!

    6) A “GREEN REPIPE” potable water system refers to a Pex repipe potable system only – such as UPONOR or ZURN with corrosion resistant fittings. CPVC and copper systems are not green systems.

    7) The drywall pieces that are removed must be used in the patching process as each texture is a little different in thickness. This gives you a uniform surface thickness as you start the repair process. Each piece goes back in the hole it came from.

    8) Repipe with an approved material. There are currently three main materials used in pex repiping jobs across the US: copper pipe and fittings, CPVC pipe and fittings, and PEX repipe and fittings. (DO NOT USE CPVC, IT IS THE NEXT POLYBUTYLENE)

    9) Repipe inspections must be performed by the local building inspectors after the repipe is completed, with the system under full water pressure.

    10) The signed inspection card must be given to the homeowner after the PEX repipe inspection is completed.

    11) Drywall repair begins after all the necessary backing has been installed. Backing supports the drywall pieces that were removed to access the potable water pipes and accommodate the repiping of a new Pex repipe or copper potable water system.

    12) The fiberglass mesh tape must be used 100% of the time.

    13) The patches must be pre-filled with quick set patching compound. The compound comes in 18lb bags, and because it is a powder, it must be mixed with water. This locks the perimeter of each patch and will make the area of the patch stronger than it was before the work process began. The reason this is important is that when you close the doors in the house, the walls flex just a little bit, and if you do not perform this method of repair, the patch will fracture over time from the flex/vibration caused by shutting the doors.

    14) Do not coat the drywall patches with regular all-purpose joint compound on the repipe patches.This is a common practice and the patches will crack later 100% of the time, even if it’s years later.

    15) Coat all the repipe drywall patches with quick set patching compound only. USG will do and you can find it at any home and hardware store, or you will have fractures in the walls at the patch locations.

    16) Float all the walls with quick set patching compound and use a 12″ drywall knife and stagger each coat until the walls become smooth and flat. The next step is wet sanding the patches and this must be done if you want the patches to blend in perfectly after the texture is applied. The reason you’ve seen bad patches in the past is that repairmen do not know how to “kill the edges.” This is an old drywall term that means you must do the detail wet sanding work and there is no short cut.

    17) Texture to match the existing texture, and this is not as easy as you might think. This is a real art form for the few that know what they are doing. Also, if the texture is spray texture, you must sponge off the overspray for the texture to match. Nothing gives away the location of a patch more than overspray that is painted over and not “killing the edges.”

    18) Paint to match the existing paint. All repipe companies color match the same way. They run down to their local hardware store and have the computer color matching done by the man behind the counter. This is beginner color matching. The proper way to color match is hand color matching. First, match the paint sheen. Second, computer match for the base color. Third, tint for color adjustment. Fourth, match the color and sheen after the paint sample has dried. Repeat if necessary. Did you know that the paint color on the wall after it dries will be different than the paint color while it is wet and in the can?

    19) If you follow the basic repiping rules, after a very short time you will not be able to point out all the drywall patches from the repair. You will simply forget where the holes were due to the patches receiving the proper floating, texture and painting techniques. Your friends, neighbors, relatives, and even plumbing contractors will not be able to find the patches.

    20) This is a basic guideline for a home repipe. and if done, properly you will have a repipe that was done as well as a repipe can be done.

    At Integrity Repipe. we provide total abandonment of your existing potable system, and there are never hidden extras, and we don’t hire subcontractors. You’ll receive nothing but the finest, most complete and professional job in the industry. The scope will be for a lead-free and yellow brass -free potable “GREEN SYSTEM” with a full lifetime warranty that covers material and labor.

    Contact Your Local Burbank Repiping Company


    RP Gas Piping Repair Arizona #rp,gas #piping,arizona,propane #tanks,for #sale,phoenix,licensed,natural #gas,line #contractor,installation,services,repair,gas #pipe


    #

    RP Gas Piping provides installation of natural gas, propane tanks and systems for interior and exterior appliances. All work is performed by trained and certified crew members to ensure safety and code compliance. We offer gas pipe repair and gas pipe installation to all of Arizona.

    Natural gas is a popular option for most homeowners today. Natural gas burns cleanly and is economical and safe. RP Gas Piping can install natural gas line systems for interior and exterior appliances whether you have just one gas barbeque, fire feature or are in need of an annual master meter inspection .

    Natural gas plumbing is an efficient and cost effective way to provide reliable energy for a variety of gas appliances in both a residential and commercial environment. Gas plumbing is an energy source often used for heating, cooking, and electricity generation and is widely available throughout Arizona.

    Propane is a clean, cost-efficient gas option. It stores safely in tanks and can be used for homes that do not have access to natural gas lines. We offer a full range of propane systems from small propane tanks for a single appliance to large systems that provide propane needs for the entire property.

    View the RP Gas way of doing business video!

    It is important that you choose a natural gas contractor in Arizona that understands the specialized natural gas piping trade. Please view our short video that will educate you on what to expect from our installation process when hiring RP Gas Piping. We are a professional gas line contractor and are here to serve you.

    What Satisfied Customers Are Saying

    The work RP Gas Piping did at our home was top notch. They were extremely careful and the trenching was completed with no damage to the landscaping what so ever. Clean up on the site was incredible. They were a pleasure to work with.

    I am recommending your company everywhere I go. If I need anything gas related you will be the only ones we will call. Many thanks again. If you ever have a customer who wants some recommendations, please have them call me.

    We have been using RP Gas Piping since their inception. Their prompt service and competitive pricing makes it a pleasure to work with them.

    RP Gas Piping – Phoenix, Arizona

    RP Gas Piping is a full-service, high quality, safe, reliable gas piping contractor in the Phoenix area and throughout Arizona. We offer excellent customer service. Together with our famous “DO IT RIGHT THE FIRST TIME” mentality, RP Gas Piping creates value for our customers and business partners. Our company is a recognized leader of quality, accountability and professionalism that will save both homeowners and contractors time and money.

    Whether you are a contractor or homeowner, designing or updating a home with beautiful outdoor gas appliances requires a gas line contractor with years of proven experience. RP Gas Piping provides industry standard, inspector approved gas piping services. Each site is evaluated and a comprehensive plan is developed for installation that meets all applicable codes. The plan includes efficient use of material and time that ensures the work is done correctly the first time.

    Our Objective

    “Our goal as a company is to provide our existing customers and potential customers with the best possible customer service to ensure the longevity of our company through repeat customers and referral business. We will perform for our customers with the highest level of quality services at competitive market prices.”

    Natural Gas Services


    Trenchless Pipelining Systems #trenchless #pipelining, #sipp, #cured #in #place #pipe, #epoxy #pipe


    #

    Trenchless Pipelining Systems Made In The USA. Perma-Liner™ (PLI) is the leading manufacturer and supplier of trenchless pipeline rehabilitation equipment, cipp products & materials in North America. Since 1999 PLI has developed systems to rehabilitate existing sewer systems without excavation.

    Our experience in the CIPP (Cured-In-Place-Pipe) industry has allowed Perma-Liner™ to design, patent, and manufacture state of the art technology. Based on the design of the equipment and materials, PLI has the ability to offer compact “User-Friendly” systems. Perma-Liner™ provides complete “Turn-Key” Trailer or Truck Build-Out Packages, Certification / Training, Technical Support, Marketing Support and Specification & Design Support.

    Your success is our success! Perma-Liner™ does not charge Franchise Fees or Royalties. Perma-Liner™ succeeds when you succeed! We provide a solid partnership plan that delivers real savings to our clients.

    PERMA-LINER ™ OPENS NORTHEAST DISTRIBUTION FACILITY

    Clearwater, FL, October 14, 2016– To meet our growing demand, Perma-Liner ™ has opened a distribution facility in the Philadelphia metro area of New Castle, Delaware. This new facility will support the current 60,000 square foot manufacturing and distribution center in Clearwater, FL, our West Coast distribution center in Anaheim, CA and our Midwest distribution center in Plainfield, IL.

    This location will allow for the convenience of on-site pickup and local delivery. As well as prompt next day service for all of the Northeast and Mid-Atlantic regions of the United States. This facility will offer full stocking of CIPP materials and equipment. Direct 24-hour assistance will be available to all Certified Perma-Liner ™ Installers.

    The Northeast Grand Opening is taking place October 25th – 27th and will feature the applauded “Sealing the System” presentation, live demonstrations, Turn-Key Trailers and the latest CIPP technology.

    CLICK HERE TO RECEIVE A FREE PRINTED CATALOG


    Corrugated metal culvert, culvert metal pipe manufacturers China #corrugated #metal #culvert,corrugated #metal


    #

    Corrugated metal arch, span 8 meters, applied to SongTong ex.

  • Diameter 6 meters corrugated metal culvert pipe with bitumen.

  • Corrugated steel pipe in BiWei expressway, diameter 3 meters

  • Structre plate diameter 6 meters, culvert length 130 meters.

  • Corrugated metal pipe diameter 3 meters in double Guang expr.

  • Corrugated metal structure plate arch apply to magazine

  • Diameter 4meter corrugated steel pipe in PanZhiHua

  • Corrugated steel culvert GuangYue avenue in SiChuan province

    Address: Hegang Road, Wuyi Circle Economic Zong, Hengshui City, Hebei Province, China

    Tel: +86 318 5876 998

    Fax: +86 318 5876 111