Oldsmobile Aurora and Intrigue SES Code P0410 #oldsmobile #aurora, #p0410, #olds #intrigue,


Problem with my 2001OldsmobileAurora 3.5L.
I r
eplaced secondary air injection pump with new GM part
and 2 wire connector to fix a GM P0410 code check engine light is still on after being
cleared. Wondering if there is some fuse or wire that could be blown from the air injection pump connector
being melted? I have seen this on one other occasion and was not able to repair the problem. The
injection pump relay is ok.

The pump may be blown. But another common thing that will cause code P0410
is a 50 amp maxi fuse in the underhood fuse block. That may be blown. Another common thing that can
cause that code is one or both of the AIR diverter valves that are vacuum controlled by the bypass valve
solenoid. That solenoid is powered by the IGN 1 fuse.

These two valves get stuck and do not allow the air from the pump to enter the exhaust. The valves are
silver, and have small tubes running into the exhaust manifolds. They have 1 vacuum hose on them. One
is above the belt, near the firewall, the other is near the dr. side of the front valve cover. Use a vacuum
pump to see if the valves hold vacuum after making sure the solenoid is supplying vacuum when the AIR
pump turns on.

The PCM controls the ground. Testing for vacuum out of solenoid must either be done at the solenoid, or
if doing at the diverter valves, both valves must be disconnected, and plug 1 off while checking the other.
Then plug the other, and check the first. If you just pull a hose off one valve and check for vacuum, and
the other valve is bad, the vacuum will all go to the bad valve, and you will not get any at the valve you are
checking. It does sound like the valves are bad. They should hold vacuum. A way to test that is to jump
the pump relay so it comes on, engine at idle, use vacuum pump at 1 valve. You should hear a definite
change in the sound of the pump when vacuum applied then released if the valve is working.

The Secondary Air Injection (AIR) System reduces exhaust emissions following initial engine start up.
The powertrain control module (PCM) activates the AIR system by suppling a ground to the AIR pump
relay and AIR solenoid relay simultaneously. The AIR pump forces pressurized fresh air into the
pipes/hoses and past the check valve into the exhaust manifold, accelerating catalyst operation.

After having my transmission rebuilt I have this trouble code up po410,what could be the cause?

David Del Polito Said:
I have a 2000 olds intrigue, 3.5 with only 60000 miles on it, In one the other questions, there was mentioned a grounding issue that could possible
cause a intermittent problem shifting with the trans. I went to two different trans / mechanic shops, I told me it had to be rebuilt at a cost of $2000. The
other mechanic shop said he ran the diagnosis thru his snap- on computer system and found no codes and test drove it with his hand held plugged in
but found no problem? Can this ground be the issue. Can you tell me how to resolve it. I personally changed the oil and the trans filter, but I was
told that doesn’t replace all the oil only the pan oil. Thanks for any advise.

David Del Polito said:
Ok so first how do I get a complete oil change on the transmission. Second I never had a error code or trouble code come up ,flash or was told by the
the second mechanic he showed nothing on his diagnostic computer. But I was co concerned that the shifting wasn’t good but it now seems
intermittent. Any suggestions. Thank you for your input.

David Del Polito said:
Ok thanks I’ll try that.

IPhone 8 s Anticipated In-Screen Fingerprint Sensor Delaying Shipments: Report #iphone #8


iPhone 8’s Anticipated In-Screen Fingerprint Sensor Delaying Shipments: Report


  • Apple said to be considering three options for the sensor
  • The company said to stock as many as 90 million units of iPhones in Q4
  • Recent report said that Apple has succeeded in the implementation

While a recent report suggested that Samsung Galaxy Note 8 will not feature a fingerprint scanner embedded in the display, it seems like Apple’s implementation of the feature has also hit a roadblock. If the latest reports are to be believed, iPhone 8 production may have been delayed as the Cupertino-based company has still not finalised the design for the fingerprint scanner embedded in the display.

Investment firm Cowen Co. has claimed that Apple is yet to finalise plans for the implementation of Touch ID on iPhone 8, as per a memo received by CNET. Citing analysts, the report says that currently, Apple is considering three options for the fingerprint sensor on the upcoming iPhone 8.

As the first option, the company is considering “thinning the cover glass for the fingerprint area (cover glass cutout).” The second option under consideration would be to create a pin hole through the glass for optical or ultrasonic fingerprint sensing. The final option would be to replace the the AuthenTec Touch ID with a ‘film’ fingerprint sensor that is integrated with the display, as per the report.

As the iPhone-maker still seems to be deliberating upon these options, the investment firm has predicted that the iPhone 8 shipments will be delayed by a month of two and will eventually go on sale in the fourth quarter this year. In order to make up for this expected delay, Cowen says that Apple can possibly stock as many as 90 million iPhone units in fourth quarter of 2017.

Notably, all the options mentioned above suggest that the fingerprint scanner will be present at the front of the display and not at the back, as has been suggested by some earlier rumours.

Interestingly, the same report that suggested Galaxy Note 8 will not be getting an in-screen fingerprint sensor due to security issues also suggested that Apple has succeeded in the implementation of the feature on iPhone 8. While the report mentioned that the company faced its fair share of problems with the design, it said that the Cupertino-based tech giant finally succeeded in introducing it.

AutoCrib: Home #inventory #management, #logistics #management, #inventory #control, #inventory #management #software, #industrial


Vend Everything

What Is Industrial Vending?

Industrial vending machines provide point-of-use inventory management for industrial supplies. Workers simply scan an ID or fingerprint to issue or return items. The industrial vending system does the recordkeeping automatically just like a tool crib attendant. It can even re-order the products for you!

Clients Who Demand The Best Industrial Vending Solutions

  • Automotive and Heavy Equipment
  • Caterpillar
  • Ford Motor Company
  • MAC Trailer
  • Michelin
  • Red Bull Racing
  • Tesla Motors
  • Triumph Motorcycles
  • Aviation and Aerospace
  • Airbus
  • Bell Helicopter
  • General Dynamics
  • Gulfstream Service Centers
  • Lockheed Martin
  • Northrop Grumman
  • U.S. Air Force
  • Department of Defense (DoD)
  • Barksdale AFB
  • Ellsworth AFB
  • Hill AFB
  • Naval Undersea Warfare Center (NUWC)
  • Tinker AFB
  • Warner Robins AFB
  • Energy and Utilities
  • GE Energy
  • LM Wind Power
  • Nevada Energy
  • Otter Tail Corporation
  • Siemens
  • U.S. Department of Energy
  • Food Processing and Beverage Industry
  • Bimbo Bakeries
  • Campbell’s Soup
  • Hershey Foods
  • JBT FoodTech
  • Labatt Breweries
  • Marel Stork Poultry Processing
  • Medical and Pharmaceuticals
  • Bayer
  • Boston Scientific
  • Covidien
  • GE Healthcare
  • Johnson & Johnson
  • Noble Biocare
  • NuVasive
  • Stryker

AutoCrib vending systems helped JetBlue Airways to implement new technology in our operation. This allowed us to track our assets and reduce touch points with a return on investment that was less than 12 months. Rawlson Singh Manager, Material Operations – Jet Blue

S ?>

Hotel Price Scanner – Hotel Price Comparison Search Engine #mayfair #hotel

#motel search engines


The Hotel Price Scanner is a hotel price comparison service. Our search engine queries more than 1 million hotel deals, so you can compare hotel prices is more than 200,000 hotels in more than 200 countries. We want you to pay the lowest price possible for your hotel. Should you find your hotel room at a lower online rate after you have booked with a site listed on Hotel Price Scanner we will refund the difference.

On a small screen? Visit our dedicated mobile site!


Compare prices at 3125 hotels in London.


Compare prices at 3569 hotels in Paris.

New York

Compare prices at 1423 hotels in New York.


Compare prices at 6005 hotels in Rome.


Compare prices at 1723 hotels in Amsterdam.


Compare prices for 705 hotels in Sydney.

Latest Posts

A trip to Tokyo can be like taking a step into another world, a bombardment of unusual colours, unfamiliar sounds. Read More

Are you a dedicated powder junkie? Looking for a new off-piste challenge? Read on! Hotel Price Scanner’s ski and. Read More

About HPS

The Hotel Price Scanner is the world’s leading hotel price comparison service. We are 100% independent and have no direct relationship with any hotels or booking providers. Our service offers not only price information, but also hotel reviews, descriptions and millions of hi-resolution images. Our search engine queries more than 200,000 hotels in thousands of destinations in approaching 200 countries worldwide and we guarantee to find you the cheapest rates!

Popular Languages

Best Price Guarantee

We want you to pay the lowest price possible for your hotel. Should you find your hotel room at a lower online rate after you have booked with a site listed on Hotel Price Scanner, we will refund you the difference, provided that this lower rate is available online. Learn more about the Hotel Price Scanner best price guarantee.

Hotel Price Scanner Mobile

In addition to our dedicated mobile site, you can also now find The Hotel Price Scanner on the Android Market, and in the Blackberry App World.